Skip to main content
info@vijr.org
7043755927
e-ISSN: applied
Virtus International Journal of Research

Virtus International Journal of Research

Published

SUSTAINABLE POLYPROPYLENE BIOCOMPOSITES REINFORCED WITH HIGHLY CARBONIZED PALM KERNEL SHELL POWDER: COUPLING AGENT EFFECTS, PARTICLE SIZE OPTIMIZATION, AND CIRCULAR ECONOMY POTENTIAL FOR RIGID FOOD PACKAGING

Published in Oct-Dec 2026 (Vol. 1, Issue 1, 2026)

SUSTAINABLE POLYPROPYLENE BIOCOMPOSITES REINFORCED WITH HIGHLY CARBONIZED PALM KERNEL SHELL POWDER: COUPLING AGENT EFFECTS, PARTICLE SIZE OPTIMIZATION, AND CIRCULAR ECONOMY POTENTIAL FOR RIGID FOOD PACKAGING - Issue cover

Abstract

This study investigates the valorization of palm kernel shell (PKS), a widely available agricultural byproduct of the palm oil sector, by evaluating the effects of coupling agent modification and particle size on its use as a reinforcing filler in polypropylene (PP) for rigid food packaging. To enhance interfacial adhesion and composite performance, PP was modified with maleic anhydride-grafted polypropylene (MAPP) as a coupling agent. The MAPP-modified PP was blended with carbonized palm kernel shell powder (PKSP) at controlled particle sizes (75 µm, 250 µm, and 500 µm) and varying weight fractions (0, 5, 10, 15, 20, and 25 wt.%). Composite specimens were produced through melt compounding followed by compression molding. Mechanical performance specifically tensile strength and tensile modulus was evaluated according to ASTM D638 standards and subsequently optimized to achieve the most favorable combination of strength and stiffness. Numerical optimization was conducted using a Python script employing the Monte Carlo method based on the geometric mean. Experimental optimization reveals that 25 wt% PKSP yields the highest weighted optimization scores across all particle sizes, with the 75 µm–25 wt% formulation attaining the top score. Pareto optimization similarly identifies 75 µm at 25 wt% as optimal, while product optimization demonstrates that 25 wt% of either 75 µm or 500 µm maximizes the strength–stiffness product. Geometric mean optimization ranks 75 µm at 25 wt% highest due to minimal fluctuation in both properties across filler loadings. Desirability function analysis positions 75 µm–25 wt% just behind 500 µm–25 wt%. Accordingly, the 75 µm–25 wt% formulation emerges as the optimal set for achieving the best balance between strength and stiffness. This research demonstrates that MAPP-enhanced PP/PKSP biocomposites, sourced from agricultural residue, offer a promising sustainable alternative for rigid food packaging applications, supporting waste reduction and circular economy principles.

References

  1. [1]Aguiar, L. G. de A., Alves, F. C., de Andrade Junior, A. J., Barbosa, R. F. S., Sampaio, N. S., Rosa, D. S., & Mulinari, D. R. (2026). Revaluation of pine nutshell waste (Araucaria angustifolia) in recycled PP composites: Mechanical and thermal properties and life cycle assessment. Journal of Composite Materials. Advance online publication. https://doi.org/10.1177/00219983261416812
  2. [2]Ani, H. O., Oriaku, E. C., Mgbemene, C. A., & Enibe, S. O. (2026). Insulating properties of carbonized palm kernel shell-reinforced epoxy matrix composites at different temperatures. Materials Proceedings, 31(1), Article 27. https://doi.org/10.3390/materproc2026031027
  3. [3]Baffour-Awuah, E., Akinlabi, S. A., Jen, T. C., Hassan, S., Okokpujie, I. P., & Ishola, F. (2021). Palm kernel shell filled in maleated polypropylene (PKS/PP) and palm kernel shell/nanosilica-filled maleated polypropylene (PKS/Nanosilica/PP) hybrid composites. IOP Conference Series: Materials Science and Engineering, 1107, Article 012090. https://doi.org/10.1088/1757-899X/1107/1/012090
  4. [4]Environmental Investigation Agency. (2026). Back to basics – Plastic packaging. EIA Report.
  5. [5]Espadas-Aldana, G., Guaygua-Amaguaña, P., Vialle, C., Belaud, J.-P., Evon, P., & Sablayrolles, C. (2021). Life cycle assessment of olive pomace as a reinforcement in polypropylene and polyethylene biocomposite materials: A new perspective for the valorization of this agricultural by-product. Coatings, 11(5), Article 525. https://doi.org/10.3390/coatings11050525
  6. [6]Mbah, P. A., Onyiah, M. I., Kolawole, O. O., Okoye, B. O., & Osuji, N. C. (2026). Valorization of palm kernel shell powder for the development of MAPP-enhanced polypropylene bio-composites: Mechanical optimization and suitability for food packaging applications. International Journal of Innovative Research in Technology(IJIRT), 12(11), 2349–6002. https://doi.org/10.64643/IJIRT196199
  7. [7]Mohammad Suffian James, R., Mohd Yusof, N., Sze Ming, L., & Paik San, H. (2025). Biomass-derived carbon fillers in biopolymer composite coating films for sustainable food packaging: A review. Journal of Composites Science, 10(6), Article 296. https://doi.org/10.3390/jcs10060296
  8. [8]Pappula, B., Turaka, S., Jagannati, V., Sundeep, M., Singh, A., Choo, H. L., & Makgato, S. (2026). From discrete experiments to continuous design maps: Pareto and knee-band selection for ceramic microspheres/multi-walled carbon nanotubes epoxy composites. Materials Today Communications, 54, Article 115690. https://doi.org/10.1016/j.mtcomm.2026.115690
  9. [9]Safwan, M. M., Lin, O. H., & Akil, H. M. (2013). Preparation and characterization of palm kernel shell/polypropylene biocomposites and their hybrid composites with nanosilica. BioResources, 8(2), 1539–1550. https://doi.org/10.15376/biores.8.2.1539-1550
  10. [10]Rodriguez, J. (2025, June 30). The impact of recycling and waste on
  11. [11]the packaging industry to 2030. Smithers. https://www.smithers.com/en-gb/services/market-reports/packaging/the-impact-of-recycling-and-waste-on-packaging
  12. [12]Uddin, M. M., Ador, M. S. H., Momo, A. T., & Rahman, M. Z. (2026). Data-driven design of E-glass/epoxy hybrid composites incorporating aquatic and terrestrial lignocellulosic fibers for balanced mechanical and moisture-resistant performance. Materials Advances, 7(18), 9303–????. https://doi.org/10.1039/D6MA00823B

Authors (5)

P.A. Mbah

Projects Development Institute...

View all publications →

C.S. Asowo

Standards Organization of Nige...

View all publications →

M.I. Onyiah

Projects Development Institute...

View all publications →

A.E. Esuvbie

Projects Development Institute...

View all publications →

B.O. Okoye

Projects Development Institute...

View all publications →

Download Article

PDF

Best for printing and citation

File size: 1.3 MB
Format: PDF

Article Information

VIJR110004

VIJR-01-000004

1-17

2026-11-20

JATS XML

Article Impact

Views:18
Downloads:8

How to Cite

Mbah, P., Asowo, C., Onyiah, M., Esuvbie, A., & Okoye, B. (2026). SUSTAINABLE POLYPROPYLENE BIOCOMPOSITES REINFORCED WITH HIGHLY CARBONIZED PALM KERNEL SHELL POWDER: COUPLING AGENT EFFECTS, PARTICLE SIZE OPTIMIZATION, AND CIRCULAR ECONOMY POTENTIAL FOR RIGID FOOD PACKAGING. Virtus International Journal of Research, 1(1), 1-17. https://vijr.org/articles/VIJR110004

Article Actions

Whatsapp